LM5033SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5033 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 16V |
| Output Type | PWM Signal |
| Operating Supply Voltage | 9.6V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Frequency Control, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 16ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 16 ns |
| Max Frequency | 1MHz |
| Isolation | Non-Isolated |
| Output Phases | 1 |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5033SD/NOPB Overview
With its 10-WDFN Exposed Pad package, the switching controller fits the needs of most applications. 2 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle PWM Signal dc switching's outputs (s). 15V~90V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. This switching controller can switch at 200kHz 600kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Various 10 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. You can find other relevant dc to dc converter ics by searching "LM5033". Switching converter has a total of 10 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. A 16V voltage of DC regulator was detected in the test statistics. Considering the dc to dc regulator can only accept 90V input voltage, it is important to take note of this. The dc dc regulator's usual output current is 1.5A, which should be noted down when you start a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThis dc regulatorhas a max frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 9.6V. There is a 2mA volt supply current.
LM5033SD/NOPB Features
PWM Signal Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
LM5033SD/NOPB Applications
There are a lot of Texas Instruments LM5033SD/NOPB DC to DC converter applications.
- Mobile phones
- Constant current circuits
- Various CNC machine tools
- Computed tomography (CT)
- Pipe bending machines
- Injection molding machinery
- Cutting machine tools
- Die casting equipment
- Scientific testing
- Wide-range voltage regulation circuits
