LM5034MTC
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM5034 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 13V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 76 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5034MTC Overview
As a result of 20-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 13V~100V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 200kHz 600kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 20. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. You can find other relevant dc to dc converter ics by searching "LM5034". Total pins of switching converter are 20. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 13V. This dc to dc regulator accepts only 100V input voltage at most. normally, the dc dc regulator's output current is 2.5A, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 76 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 1MHz.
LM5034MTC Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
LM5034MTC Applications
There are a lot of Texas Instruments LM5034MTC DC to DC converter applications.
- Wind power
- Imported equipment
- Experimental setup
- Flaw detection equipment
- Production lines
- PSRR circuits
- Direct power supply system
- Printing
- Wide-range voltage regulation circuits
- Ball screw pair
