LM5034MTCX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5034 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Output Power | 600W |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 13V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 100V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 12ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 10 ns |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 76 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5034MTCX/NOPB Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. For 2 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 13V~100V volts and has 13V~100V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. This switching controller can switch at 200kHz 600kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Frequency Control, Soft Start which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. 20 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 48V volts. Other relevant dc to dc converter ics will be returned if you search "LM5034". 20 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 13V. The dc to dc regulator can only accept 100V input voltage. In most cases, the output current of the dc dc regulator will be 2.5A, so note that when you start the project. The maximum duty cycle of this voltage regulator dc to dc is set to 76 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 1MHz.
LM5034MTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 76 %
LM5034MTCX/NOPB Applications
There are a lot of Texas Instruments LM5034MTCX/NOPB DC to DC converter applications.
- Smoke exhaust equipment
- Network technology
- Electrical distribution systems
- Electric heating, lighting
- Servo drive system
- Various precision measuring instruments
- Solar power plants
- Motor controller circuits
- Product testing
- Surface processing equipment
