LM5035AMH-1/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.9V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 35mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 95 % |
| Duty Cycle | 0 % |
| Length | 9.7mm |
| Width | 6.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035AMH-1/NOPB Overview
With a 28-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 13V~105V volts and has 13V~105V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 200kHz 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Frequency Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 28 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. Other relevant dc to dc converter ics can be found by searching "LM5035". Switching converter has a total of 28 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 7.9V voltage. The dc dc regulator's usual output current is 2A, which should be noted down when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. There is 35mA supply current for it.
LM5035AMH-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
LM5035AMH-1/NOPB Applications
There are a lot of Texas Instruments LM5035AMH-1/NOPB DC to DC converter applications.
- Electrical power transmission
- Experimental setup
- Computer monitoring equipment of building
- Product burn-in
- Textile machinery
- Lathes
- Domestic water pumps
- Laboratories
- Computer-related products
- Refrigerators of central air conditioners
