LM5035AMHX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Output Power | 100W |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Duty Cycle | 92 % |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035AMHX/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 13V~105V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. With this switching controller, you can switch at 200kHz 500kHz. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 20 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LM5035". In total, switching converter has 20 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 0 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator's maximum frequency is 1MHz.
LM5035AMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035AMHX/NOPB Applications
There are a lot of Texas Instruments LM5035AMHX/NOPB DC to DC converter applications.
- Digital display device
- Smoke prevention equipment
- Large fire protection systems
- Printing
- Production lines
- Correction machines
- Low output voltage switching power supply circuits
- Medical monitoring systems
- Scientific testing
- Series voltage regulation circuits
