LM5035ASQ/NOPB
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 250mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Output Power | 100W |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 105V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 0 % |
| Isolation | Isolated |
| Duty Cycle | 92 % |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
LM5035ASQ/NOPB Overview
In the 24-WFQFN Exposed Pad package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. 13V~105V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 200kHz 500kHz. A generalization of dc dc regulator can be made using Surface Mount. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of terminations with 24 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 48V. A search for "LM5035" will reveal other relevant dc to dc converter ics. 24 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 250mV voltage. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. A duty cycle set at 0 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz. For nominal working status, the input voltage can be set as 105V. It runs on a supply current of 4mA.
LM5035ASQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
Frequency: 1MHz
LM5035ASQ/NOPB Applications
There are a lot of Texas Instruments LM5035ASQ/NOPB DC to DC converter applications.
- Hydrogen power
- Post equipment
- Solar power plants
- Computed tomography (CT)
- Textile machinery
- Hydro power
- USB circuits
- Various CNC machine tools
- Surface processing equipment
- Serial communication converter
