LM5035BSQ/NOPB
| Parameters | |
|---|---|
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Isolation | Isolated |
| Duty Cycle | 0 % |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.6V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
LM5035BSQ/NOPB Overview
It comes in a 24-WFQFN Exposed Pad package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 13V~105V. A -40°C~125°C TJ dc switcher is not a problem. Using this switching controller, it is possible to switch at 200kHz 500kHz. dc dc regulators can be carried out with Surface Mount. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . There are many different types of terminations for 24. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 48V. LM5035 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 24 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 15V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 2A. The maximum duty cycle of this voltage regulator dc to dc is set to 0 % to ensure reliability during power-up and power-down. DC switcher's Surface Mount qualifies it for most applications and prototypes. This dc regulatorhas a max frequency of 1MHz. A circuit should contain 7.6V in order to ensure the voltage regulator dc to dc runs safely and reliably. A supply current of 4mA is used to power it.
LM5035BSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035BSQ/NOPB Applications
There are a lot of Texas Instruments LM5035BSQ/NOPB DC to DC converter applications.
- Fire elevators
- Computer-related products
- Textile machinery
- Injection molding machinery
- Boring machines
- Medical equipment
- Access control systems
- Driver circuits
- Energy management systems
- seismic instrument power circuits
