LM5035BSQX/NOPB
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.6V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Duty Cycle | 92 % |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
LM5035BSQX/NOPB Overview
With a 24-WFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. A 13V~105V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 200kHz~500kHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Frequency Control, Ramp, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the QUAD position. Various 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 48V. You can find other relevant dc to dc converter ics by searching "LM5035". Total pins of switching converter are 24. Specially, switching converter corresponds to type Switching Regulator or Controllers. It's important to remember that the dc dc regulator's normaloutput current is 2A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 0 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 1MHz for this dc regulators. It is suggested that users apply 7.6V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
LM5035BSQX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz~500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035BSQX/NOPB Applications
There are a lot of Texas Instruments LM5035BSQX/NOPB DC to DC converter applications.
- CNC system
- Magnetohydrodynamic power
- Industrial controllers
- Photovoltaic power
- Mobile phones
- Wind power
- SMT equipment
- Digital display device
- Industrial robots
- Electrical power transmission
