LM5035CMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Duty Cycle | 92 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035CMHX/NOPB Overview
It comes in a 20-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 13V~105V are the dc control's supply voltage and operating voltage, respectively. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 200kHz 500kHz . dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 20. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 48V volts. Search for "LM5035" to find other relevant dc to dc converter ics. Switching converter has a total of 20 pins. Switching converter type is specifically Switching Regulator or Controllers. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. The maximum duty cycle of this voltage regulator dc to dc is set to 0 % to ensure reliability during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulator has a maximum frequency of 1MHz.
LM5035CMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035CMHX/NOPB Applications
There are a lot of Texas Instruments LM5035CMHX/NOPB DC to DC converter applications.
- Gear/thread machining machines
- Smoke prevention equipment
- Fire elevators
- Medical monitoring systems
- Automatic testing equipment
- Printing
- Digital display device
- Various precision measuring instruments
- Photovoltaic power
- Scientific testing
