LM5035CSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Nominal Input Voltage | 105V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 0 % |
| Isolation | Isolated |
| Duty Cycle | 0 % |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035CSQ/NOPB Overview
It comes in a 24-WFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Cut Tape (CT) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 13V~105V. Suitable for work in a -40°C~125°C TJ dc switcher. Using this switching controller, it is possible to switch at 200kHz 500kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Frequency Control, Ramp, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a QUAD terminal on the switching converters. A variety of terminations with 24 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 48V. A search for "LM5035" will reveal other relevant dc to dc converter ics. There are a total of 24 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, the DC regulator outputs 15V voltage. In most cases, the dc dc regulator's output current is 2A. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 0 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 1MHz Hz. It is possible to set the input voltage to 105V for nominal working status. There is 4mA supply current for it.
LM5035CSQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
Frequency: 1MHz
LM5035CSQ/NOPB Applications
There are a lot of Texas Instruments LM5035CSQ/NOPB DC to DC converter applications.
- Industrial controllers
- Cutting machine tools
- Flexible manufacturing cells
- Thermal power
- Hydrogen power
- Overvoltage protection circuits in TV sets
- Special machining machine tools
- Pipe bending machines
- Computer monitoring equipment of building
- Low output voltage switching power supply circuits
