LM5035MHX/NOPB
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Output Power | 100W |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 0 % |
| Duty Cycle | 92 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
LM5035MHX/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 13V~105V and has a 13V~105V supply voltage. Qualified to work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 200kHz 500kHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 20 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. In addition to "LM5035", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 20 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It's important to remember that the dc dc regulator's normaloutput current is 2A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 0 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sIt is estimated that this dc regulatorhas a maximum frequency of 1MHz.
LM5035MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
LM5035MHX/NOPB Applications
There are a lot of Texas Instruments LM5035MHX/NOPB DC to DC converter applications.
- Gear/thread machining machines
- Game consoles
- PSRR circuits
- Boring machines
- Experimental setup
- Domestic water pumps
- Grinders
- Electrical distribution systems
- Arc suppression circuits
- Lathes
