LM5035SQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 2MHz |
| Base Part Number | LM5035 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Quiescent Current | 8mA |
| Output Power | 100W |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 0 % |
| Isolation | Isolated |
| Duty Cycle | 0 % |
| Height | 800μm |
| Length | 5mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5035SQ/NOPB Overview
The switching controller fits in the 24-WFQFN Exposed Pad package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 13V~105V. Suitable for work in a -40°C~125°C TJ dc switcher. Switching can be done at 200kHz 500kHz with this switching controller. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Frequency Control, Ramp, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the QUAD position. A variety of dc switching's functions can be performed on 24 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis 48V volts. Search for "LM5035" to find other relevant dc to dc converter ics. There are 24 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 15V. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 0 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers work at 2MHz Hz. DC switching uses 8mA when it is dormant. 4mA volts is the supply current.
LM5035SQ/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 0 %
Frequency: 2MHz
LM5035SQ/NOPB Applications
There are a lot of Texas Instruments LM5035SQ/NOPB DC to DC converter applications.
- Window air conditioners
- Servo drive system
- Smoke exhaust equipment
- Bending machines
- Current source circuits
- Scientific testing
- PSRR circuits
- Alternators
- Medical equipment
- Mobile phones
