LM5037MT/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5037 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 15V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7.7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 60mA |
| Voltage - Supply (Vcc/Vdd) | 13V~100V |
| Quiescent Current | 3mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 200kHz 508kHz |
| Rise Time | 15ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 13 ns |
| Max Frequency | 2MHz |
| Max Duty Cycle | 96 % |
| Isolation | Non-Isolated |
| Clock Sync | Yes |
| Duty Cycle | 88 % |
| Output Phases | 1 |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5037MT/NOPB Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For outputs of 2, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 13V~100V. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 200kHz 508kHz. dc dc regulators can be carried out with Surface Mount. Featured in the dcdc regulator is Frequency Control, Ramp, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 16. Searching "LM5037" will return other relevant dc to dc converter ics. 16 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 15V. In most cases, the output current of the dc dc regulator will be 60mA, so note that when you start the project. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 2MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 7.7V. DC switchings that are dormant use 3mA. The supply current is 3mA.
LM5037MT/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 508kHz
Frequency Control, Ramp, Soft Start
Max Duty Cycle: 96 %
LM5037MT/NOPB Applications
There are a lot of Texas Instruments LM5037MT/NOPB DC to DC converter applications.
- Hydro power
- Special machining machine tools
- Series voltage regulation circuits
- Surface processing equipment
- Surge protection circuits
- Terrestrial set-top boxes
- Overvoltage protection circuits in TV sets
- Digital video recorders
- Laboratories
- Printing
