LM5039MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | LM5039 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 13V~105V |
| Max Supply Current | 6mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Topology | Half-Bridge |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 13 ns |
| Nominal Input Voltage | 105V |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5039MH/NOPB Overview
With a 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 13V~105V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. This switching controller can switch at 200kHz 500kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Frequency Control, Ramp, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . Various 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. In addition to "LM5039", there are other relevant dc to dc converter ics you can find. There are a total of 20 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The dc dc regulator's usual output current is 2A, which should be noted down when you start a project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount qualifies it for most applications and prototypes. 2MHz is the frequency of the switching controller. For nominal working status, the input voltage can be set as 105V. The supply current is 4mA. Components may become damaged if their current exceeds 6mA.
LM5039MH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 500kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 2MHz
LM5039MH/NOPB Applications
There are a lot of Texas Instruments LM5039MH/NOPB DC to DC converter applications.
- Textile machinery
- Household control circuits
- Machining centers
- Telecommunications equipment
- ATMs
- Grinders
- Various precision measuring instruments
- Mobile phones
- Medical monitoring systems
- Program control systems
