LM5041AMTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 600kHz |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Max Output Current | 5A |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Max Input Voltage | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 48V |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5041AMTC Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 15V~90V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. A switching controller such as this can switch at a value of 200kHz 600kHz . The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Dead Time Control, Frequency Control, Soft Start for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. Search for "LM5041" to find other relevant dc to dc converter ics. There are only 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 100mA when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. A frequency of 600kHz is used by the switching controller. You can set the input voltage to 48V for nominal working status. Because the dc switcher's maximum input voltage is 90V users must limit the voltage accordingly. In this case, the dc switcher won't produce more than 5A watts of output current.
LM5041AMTC Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 600kHz
LM5041AMTC Applications
There are a lot of Texas Instruments LM5041AMTC DC to DC converter applications.
- Serial communication converter
- Precision electronic equipment
- Smoke prevention equipment
- Imported equipment
- Telecommunications equipment
- Special machining machine tools
- Fire elevators
- SMT equipment
- Game consoles
- Surge protection circuits
