LM5041AMTC/NOPB
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 90V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Quiescent Current | 3mA |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height | 1.2mm |
LM5041AMTC/NOPB Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 15V~90V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. Using this switching controller, it is possible to switch at 200kHz 600kHz. The Surface Mount makes it ideal for general dc dc regulator. Dead Time Control, Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. You can find other relevant dc to dc converter ics by searching "LM5041". There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. If you start a project, note down the dc dc regulator's usual output current of 1.5A. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 1MHz for this dc regulators. It is suggested that users apply 90V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switching uses 3mA when it is dormant. With a current supply of 3mA, it runs.
LM5041AMTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041AMTC/NOPB Applications
There are a lot of Texas Instruments LM5041AMTC/NOPB DC to DC converter applications.
- Communication system
- Arc suppression circuits
- Imported equipment
- Servo drive system
- Program control systems
- Household control circuits
- Wide-range voltage regulation circuits
- Electrical power transmission
- Elevator lighting
- Lathes
