LM5041AMTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5041AMTCX Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tape & Reel (TR) surrounds pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 15V~90V voltage are supplied and operated. Worked in a -40°C~125°C TJ dc switcher before. A switching controller such as this can switch at a value of 200kHz 600kHz . As it has a Surface Mount value, it can be used for general dc dc regulator. Dead Time Control, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. The 16 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 48V. In addition to "LM5041", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. A maximum voltage of 90V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 1.5A. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 1MHz.
LM5041AMTCX Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041AMTCX Applications
There are a lot of Texas Instruments LM5041AMTCX DC to DC converter applications.
- Cutting machine tools
- Combined machine tools
- Electric water heaters
- Refrigerators of central air conditioners
- Hydro power
- Laboratories
- Ball screw pair
- Hydraulic presses
- Sink circuits
- Automatic plug-in machines
