LM5041BMTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 16V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Duty Cycle | 50 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5041BMTC/NOPB Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) are supported. dc controls with 15V~90V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 200kHz 600kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. Dead Time Control, Frequency Control, Soft Start provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. 16 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 48V nominal DC switcher's voltage input. LM5041 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 16V. At most, the dc to dc regulator accepts 90V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 25mA, so you should note it down when starting a new project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 1MHz. The supply current is 3mA.
LM5041BMTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041BMTC/NOPB Applications
There are a lot of Texas Instruments LM5041BMTC/NOPB DC to DC converter applications.
- USB circuits
- Combined machine tools
- Printing
- Planers
- Precision electronic equipment
- Window air conditioners
- Die casting equipment
- Shearing machines
- Correction machines
- Lathes
