LM5041BMTCX/NOPB
| Parameters | |
|---|---|
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 91 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25mA |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
LM5041BMTCX/NOPB Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 15V~90V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. It can switch at 200kHz 600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 48V. Search for "LM5041" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. A maximum voltage of 90V is accepted by the dc to dc regulator as an input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 50 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The max frequency of the pmic can reach 1MHz.
LM5041BMTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041BMTCX/NOPB Applications
There are a lot of Texas Instruments LM5041BMTCX/NOPB DC to DC converter applications.
- Geothermal power
- Computed tomography (CT)
- Wide-range voltage regulation circuits
- Photovoltaic power
- Electric heating, lighting
- CMM
- Scientific testing
- Solar power plants
- Industrial robots
- Telecommunications equipment
