LM5041MTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 600kHz |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3mA |
| Output Configuration | Positive |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 48V |
| Release Time | 20 ns |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Duty Cycle | 50 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5041MTC/NOPB Overview
Capsuled in the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. 15V~90V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. The switching controller can be switched at 200kHz 600kHz. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Dead Time Control, Frequency Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 48V. You can find other relevant dc to dc converter ics by searching "LM5041". There are a total of 16 pins on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Statistically, DC regulator outputs 5V volts. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at 600kHz Hz. 48V is the nominal working voltage. A current of 3mA is supplied to it.
LM5041MTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 600kHz
LM5041MTC/NOPB Applications
There are a lot of Texas Instruments LM5041MTC/NOPB DC to DC converter applications.
- Milling machines
- Laboratories
- Network technology
- Industrial controllers
- Hydraulic presses
- Emergency lighting monitoring equipment
- Sink circuits
- Program control systems
- Packaging
- Analog precision reference circuits
