LM5041SD
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM5041 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 15V~90V |
| Output Power | 500W |
| Control Features | Dead Time Control, Frequency Control, Soft Start |
| Topology | Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz 600kHz |
| Input Voltage (Max) | 90V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 20 ns |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Duty Cycle | 50 % |
| Height | 800μm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 800μm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5041SD Overview
The switching controller fits in the 16-WFDFN Exposed Pad package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 15V~90V and has a 15V~90V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. There is a switch at 200kHz 600kHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Dead Time Control, Frequency Control, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 16 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. LM5041 can be used to locate other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Switching converter type is specifically Switching Regulator or Controllers. It should be fully noted that the dc to dc regulator only accepts 90V input voltage at most. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator has a maximum frequency of 1MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 9V to the voltage regulator dc to dc.
LM5041SD Features
Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5041SD Applications
There are a lot of Texas Instruments LM5041SD DC to DC converter applications.
- Domestic water pumps
- Automatic testing equipment
- Arc suppression circuits
- Series voltage regulation circuits
- Alternators
- Nuclear power plants
- Product burn-in
- Experimental setup
- Current source circuits
- Remotely powered electric motors
