LM5041SD/NOPB

16 Terminals 15V~90V 16-Pin LM5041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM5041SD/NOPB
Package: 16-WFDFN Exposed Pad
Datasheet: -
Stock: 491
Description: 16 Terminals 15V~90V 16-Pin LM5041 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-WFDFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Frequency	685kHz
Base Part Number	LM5041
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	16V
Output Type	Transistor Driver
Operating Supply Voltage	9V
Input Voltage-Nom	48V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	3mA
Output Configuration	Positive
Output Current	1.5A
Voltage - Supply (Vcc/Vdd)	15V~90V
Quiescent Current	3mA
Output Power	500W
Control Features	Dead Time Control, Frequency Control, Soft Start
Topology	Half-Bridge, Push-Pull
Control Mode	CURRENT-MODE
Frequency - Switching	200kHz 600kHz
Input Voltage (Max)	90V
Control Technique	PULSE WIDTH MODULATION
Rise Time	20ns
Synchronous Rectifier	Yes
Fall Time (Typ)	20 ns
Max Duty Cycle	50 %
Isolation	Non-Isolated
Duty Cycle	50 %
Height	800μm
Length	5mm
Width	5mm
Thickness	800μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM5041SD/NOPB Overview

Capsuled in the 16-WFDFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 15V~90V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. In this switching controller, the switch can be set to 200kHz 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of 16 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. You can find other relevant dc to dc converter ics by searching "LM5041". The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 16V voltage. The dc to dc regulator can only accept 90V input voltage. normally, the dc dc regulator's output current is 1.5A, which you should keep in mind when starting a project. It is set to 50 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controller operates at a frequency of 685kHz. A circuit should contain 9V in order to ensure the voltage regulator dc to dc runs safely and reliably. When the dc switching is dormant, it uses 3mA. It runs on a supply current of 3mA.

LM5041SD/NOPB Features

Transistor Driver Outputs
Switching Frequency: 200kHz 600kHz
Dead Time Control, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 685kHz