LM5046MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1kW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 2MHz |
| Base Part Number | LM5046 |
| Number of Outputs | 1 |
| Output Voltage | 270mV |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | 14V~100V |
| Max Supply Current | 4.6mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | Up to 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 60ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 100V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 50 % |
| Duty Cycle | 0 % |
| Output Isolation | Isolated |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5046MH/NOPB Overview
28-PowerTSSOP (0.173, 4.40mm Width) is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .There is a mounting point for this AC/DC converter in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .An analog IC of type DUAL SWITCHING CONTROLLER is employed in this AC DC converter.When the switching frequency reaches Up to 2MHz , the circuit is closed.This AC/DC converter is designed for use within the range of 14V~100V supply voltage (Vcc/Vdd).As a result, it has had 28 terminations.On this ac/dc converter, there are 28 pins.Surface Mount is the recommended mounting method for the ac dc converters.If you select the LM5046 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .There is 2A output current set.The output voltage of the AC/DC converter is 270mV .A high efficiency can be achieved by operating at a frequency of 2MHz .AC to DC converter is capable of handling a maximum supply current of 4.6mA A.
LM5046MH/NOPB Features
Packaged with 28-PowerTSSOP (0.173, 4.40mm Width)
Switching Frequency at Up to 2MHz
With 28 pins
Output Current at 2A
LM5046MH/NOPB Applications
There are a lot of Texas Instruments LM5046MH/NOPB AC DC Converters applications.
- Humidifier
- Low-Voltage I/O System Power
- Z-Wave
- Air conditioners
- PDAs
- SMPS house keeping power supplies
- AC?DC USB chargers for Cameras
- Battery chargers for smart phones
- Wall switches
- White goods
