LM5050Q0MK-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Applications | Redundant Power Supplies |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 5V~75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM5050 |
| Output Voltage | 75V |
| Operating Supply Current | 130μA |
| Element Configuration | Single |
| Nominal Supply Current | 130μA |
| Quiescent Current | 400μA |
| FET Type | N-Channel |
| Turn-Off Delay Time | 486 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Number of Drivers | 1 |
| Max Junction Temperature (Tj) | 150°C |
| High Side Driver | YES |
| Ambient Temperature Range High | 50°C |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5050Q0MK-1/NOPB Overview
A SOT-23-6 Thin, TSOT-23-6 case is included. Parts should be packed in Tape & Reel (TR) cases. In this case, the part is mounted in the Surface Mount direction. It is given a voltage of 5V~75V. The minimum operating temperature of this component must not be -40°C~150°C. It is suitable for the component connected in Redundant Power Supplies. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. There is a N-Channel type of FET. The part is available with 6 terminations as an option. As you can see, this part is based on LM5050. 12V provides its performance. A maximum reflow temperature of this part is used if 260 is to be run. It is a part from the MOSFET Drivers family. Among the pins on the part are 6 pins. In order to operate it, 130μA is used as the supply current. Parts should be mounted Surface Mount-wise. There is a device in the Automotive, AEC-Q100 series that belongs to the market. A maximum output voltage of 75V is achieved by it. A quiescent current is used at 400μA for this purpose.
LM5050Q0MK-1/NOPB Features
in a SOT-23-6 Thin, TSOT-23-6 case
FET Type: N-Channel
6 terminations
Peak Reflow Temperature (Cel) : 260
LM5050Q0MK-1/NOPB Applications
There are a lot of Texas Instruments LM5050Q0MK-1/NOPB Ideal Diode controller applications.
- AC Rectifier
- ADAS domain controller
- PCs
- Active ORing for redundant power
- Building automation
- Active OR-ing of Redundant (N+1) Power Supplies
- MP3 Players
- Electronic point of sale
- Power supply reverse polarity protection
- USB HUBs
