LM5066PMHE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | PMBus |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 10V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5066 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 20μA |
| Adjustable Threshold | YES |
| Current - Supply | 7.2mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 9.5mA |
| Threshold Voltage | 7.8 |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO |
| Feature Pins | ADR0, ADR1, ADR2, CL, DIODE, FB, OVLO, PGD, PWR, /RETRY, SCL, SDAI, SDAO, /SMBA, TIMER, UVLO/EN, VAUX, VREF |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5066PMHE/NOPB Overview
You can find it in the 28-PowerTSSOP (0.173, 4.40mm Width) package.At the moment, there are 1 channels available.It's?packaged?in?the?form?of?a?Tape & Reel (TR).There are 28 terminations in total.Device DUAL is located at the terminal position.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 48V.Surface Mount is set up this way.The electrical component in question falls into the classification Hot Swap Controller, Monitor.Ensure reliable operation by setting the temperature to -40°C~125°C.General Purpose applications can be downloaded from the device.Hot-swappable device is featured in PMBus.The device should be able to be powered by a 10V~80VV power source.Numbers in the LM5066 family include it.Hot-swappable device is necessary to use 28 pins in order to operate the device.The gadget in Power Management Circuits is self-contained.Among its programmable features are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO.Presently, there is a limited supply of 7.2mA.Surface Mount is its direction of movement.Hot-swappable device is set to 80V (maximum supply voltage).Hot-swappable device is important to note that the part has a power supply 48V.9.5mA is its maximum supply current.
LM5066PMHE/NOPB Features
Features of PMBus
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO
LM5066PMHE/NOPB Applications
There are a lot of Texas Instruments LM5066PMHE/NOPB hot swap controllers applications.
- Industrial application
- High power circuit board
- Short circuit protection
- Power supply hotswap & inrush control
- Datacom
- Reverse current protection
- USB interface
- Redundant Array of Disks (RAID)
- Current monitor output
- Microcontrollers
