LM5066PMH/NOPB
| Parameters | |
|---|---|
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | PMBus |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 10V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5066 |
| Power Supplies | 48V |
| Number of Channels | 1 |
| Nominal Supply Current | 20μA |
| Adjustable Threshold | YES |
| Current - Supply | 7.2mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 9.5mA |
| Nominal Input Voltage | 80V |
| Threshold Voltage | 7.8V8.6V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO |
| Feature Pins | ADR0, ADR1, ADR2, CL, DIODE, FB, OVLO, PGD, PWR, /RETRY, SCL, SDAI, SDAO, /SMBA, TIMER, UVLO/EN, VAUX, VREF |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
LM5066PMH/NOPB Overview
The 28-PowerTSSOP (0.173, 4.40mm Width) package contains it.Currently, there are 1 channels accessible.In the form of a Tube, it is packaged.Hot-swappable device terminates wHot-swappable deviceh 28 in total.This device has a terminal position of DUAL.High efficiency can be achieved with a voltage supply of 48V.Surface Mount has set it up this way.Electrical components classified as Hot Swap Controller, Monitor are referred to as Hot Swap Controller, Monitor components.To ensure reliable operation, the temperature should be set to -40°C~125°C.Devices with General Purpose applications are available.An article about it appears in PMBus.Using a 10V~80VV power source should be able to power the device.Hot-swappable device is included in the LM5066 family of numbers.A 28 pin is used for operation.There is nothing else in Power Management Circuits but this gadget.Its programmable features are Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO.7.2mA is currently in short supply.Surface Mount directs its position.Hot-swappable device is 48V type power supplies that are used in this part.During operation, it can supply a maximum current of 9.5mA.
LM5066PMH/NOPB Features
Features of PMBus
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, Thermal Limit, UVLO
LM5066PMH/NOPB Applications
There are a lot of Texas Instruments LM5066PMH/NOPB hot swap controllers applications.
- Datacom
- Solid state circuit breakers
- Supply voltage monitoring
- Loads
- Circuit breakers for high-side circuits
- Thermal limitation
- Automotive circuits
- Inrush current control
- Remote access server
- Circuit breakers for electronic circuits
