LM5067MM-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V |
| Additional Feature | THRESHOLD VOLTAGE IS 8.4 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | -80V~-9V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Depth | 3mm |
| Base Part Number | LM5067 |
| Pin Count | 10 |
| Power Supplies | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Adjustable Threshold | YES |
| Output Current-Max | 500A |
| Threshold Voltage | 7.7 |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | OVLO, PGD, PWR, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5067MM-1/NOPB Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.10 terminations are present in total.A device's terminal position is DUAL.10 pins make up the entire device.High efficiency can be achieved by using 13V as supply voltage.The way it's set up is the way Surface Mount wants it.Hot-swappable device is classified as a Hot Swap Controller electrical component.For reliable operation, set the temperature to -40°C~125°C.There are -48V applications on the device.The article appears in Latched Fault.Hot-swappable device should work if you use a -80V~-9VV power source.Numbers in the LM5067 family include it.For operation, 10 pins are used.There is nothing else in Power Management Circuits but this gadget.Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO is its programmable feature.There is a Surface Mount-axis orientation to it.The power supplies of the part is 48V.Hot Swap is 2mA that operates the supply current.The same device can also be used to produce THRESHOLD VOLTAGE IS 8.4 VOLT.
LM5067MM-1/NOPB Features
The terminal position of 10
Features of Latched Fault
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO
LM5067MM-1/NOPB Applications
There are a lot of Texas Instruments LM5067MM-1/NOPB hot swap controllers applications.
- Switch
- Redundant Array of Disks (RAID)
- Circuit breakers for high-side circuits
- Industrial
- Solid state circuit breakers
- Microcontrollers
- Redundant negative voltage supplies
- Backplane
- Continuous monitoring of device temperature
- Short-circuit protection in real time
