LM5071MT-80
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 1.8V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM5071 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Output Power | 13W |
| Power - Max | 12.95W |
| Current - Supply | 1mA |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 60V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Switching Frequency-Max | 665kHz |
| Internal Switch(s) | Both |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | Yes |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5071MT-80 Overview
The Tube package contains it.Packaged in the manner of 16-TSSOP (0.173, 4.40mm Width).As far as this application is concerned, it is a Controller (PD), DC/DC type PoE controller that is being used.The number of channels is growing strong/weak: 1.Reliability is ensured by operating PoE at -40°C~125°C.In order to operate this electrical Po E controller, it requires a voltage of 1.8V~60V as a supply voltage.Using the base part number of a part LM5071, it is possible to determine its Po E controllers.It is possible to terminate a transmission line with a 16 termination by connecting a power over ethernet controller with a matching impedance to the transmission line.It is estimated that this electrical ethernet over power controller has a maximum power of 12.95W Watts.16 pins are equipped with it.The supply current amounts to 1mA.The Po E controller in question is included in the package Switching Regulator or Controllers.As you can see, it is designed with 16 pins.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches 260 °C.Surface Mount is the direction it is mounted.In this electrical PoE power over ethernet controller, 665kHz is the maximum switching frequency.There is a maximum input voltage of 60V for this electrical power over ethernet PoE controller.This PoE controller operates at 15V volts.Power output of this ethernet over power controller is 13W watts.
LM5071MT-80 Features
Tube package
16 pin count
16 pins
LM5071MT-80 Applications
There are a lot of Texas Instruments LM5071MT-80 Power Over Ethernet (PoE) Controllers applications.
- Internet Appliances
- Dual Signature PD/Forced UPOE
- IP Phone Power Management
- POS Terminals
- High power (>12.95 W) powered devices
- PoE powered device appliances
- Pass-through System
- IEEE 802.3af Compliant PoE Powered Devices
- Single-Port PSE Power Injectors
- Routers
