LM5072MHX-80/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1.2Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Voltage - Supply | 9V~70V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 580kHz |
| Base Part Number | LM5072 |
| Pin Count | 16 |
| Output Voltage | 7.7V |
| Operating Supply Voltage | 70V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Output Current | 800mA |
| Output Power | 12.95W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 70V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Max Duty Cycle | 80 % |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5072MHX-80/NOPB Overview
The package Tape & Reel (TR) includes it.There is a way in which it is packaged which is referred to as 16-PowerTSSOP (0.173, 4.40mm Width).I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.Strong/weak channels are increasing: 1.Ensure the reliability of the PoE by operating it at -40°C~125°C.In this electrical Po E controller, the voltage of the supply is 9V~70V.There is a possibility of determining its Po E controllers by referring to the base part number LM5072.Termination with a 16 termination involves terminating a transmission line with a power over ethernet controller of matching impedance.It is equipped with 16 pin count.The Po E controller in question is included in the package Switching Regulator or Controllers.In order to make it work, it has 16 pins on it.During the reflow process of this electrical ethernet power controller, Cel (peak reflow temperature) reaches 260.As you can see, it is mounted in Surface Mount-direction.To work properly, 700μA needs to receive supply current.In this electric PoE ethernet controller, 580kHz frequencies are used to operate it.A key feature of 800mA is its output current, which provides maximum design flexibility.There is a voltage of 70V in the operating supply of this PoE controller.In this case, 1.2Ohm (*) is the value of its resistance.Power output of this ethernet over power controller is 12.95W watts.An power over ethernet controller such as this one produces a voltage of 7.7V as its output voltage.
LM5072MHX-80/NOPB Features
Tape & Reel (TR) package
16 pin count
16 pins
The output current of 800mA
1.2Ohm (Ω)
LM5072MHX-80/NOPB Applications
There are a lot of Texas Instruments LM5072MHX-80/NOPB Power Over Ethernet (PoE) Controllers applications.
- Pico-base Stations
- POS Terminals
- 4PPOE
- Higher Power Ethernet Powered Devices
- High Temperature Industrial Applications
- IP Phone Power Management
- IEEE 802.3af Compliant PoE Powered Devices
- Public Information Displays
- WLAN Access Points
- VoIP Phones
