LM5073MH/NOPB
| Parameters | |
|---|---|
| Type | Controller (PD) |
| Resistance | 1.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 12.95W |
| Voltage - Supply | 9V~70V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM5073 |
| Pin Count | 14 |
| Output Voltage | 1.25V |
| Operating Supply Voltage | 70V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Output Power | 25W |
| Output Current-Max | 0.93A |
| Nominal Input Voltage | 100V |
| Switcher Configuration | BUCK |
| Internal Switch(s) | Yes |
| Standards | 802.3af (PoE) |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
LM5073MH/NOPB Overview
It is embedded in the Tube package.In other words, 14-PowerTSSOP (0.173, 4.40mm Width) refers to the way in which it is packaged.I would like to inform you that this PoE controller is of the Controller (PD) type.Channel number is growing strong/weak: 1.In order to ensure PoE reliability, it is designed to operate at a temperature of -40°C~125°C.This electrical Po E controller operates at voltage 9V~70V.The base part number LM5073 determines the Po E controllers.In a 14 termination, the transmission line is terminated with a power over ethernet controller that matches its characteristic impedance.There is a pin count of 14 on this ethernet over power controller.This board is designed with 14 pins.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.This PoE ethernet controller is mounted in such a way that it faces Surface Mount.In order for 2mA to perform its proper functions, it needs to have a current supply that is adequate.power over the ethernet controllers like this one have maximum voltage outputs of 0.93A.This PoE controller requires a supply voltage of 70V to function properly.Its resistance is 1.5Ohm (*), which is its value.25W is the output power of this ethernet over power controller.In this case, 1.25V is the output voltage of the power over ethernet controller.
LM5073MH/NOPB Features
Tube package
14 pin count
14 pins
1.5Ohm (Ω)
LM5073MH/NOPB Applications
There are a lot of Texas Instruments LM5073MH/NOPB Power Over Ethernet (PoE) Controllers applications.
- Outdoor Security Camera Equipment
- Single-Port PSE Power Injectors
- Higher Power Ethernet Powered Devices
- Security Cameras
- Non-Compliant, Application Specific Devices
- Switches
- POS Terminals
- Single-Port PSE End-Point Applications
- Security Cameras
- IEEE 802.3af Compliant PoE Powered Devices
