LM5085MME/NOPB
| Parameters | |
|---|---|
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 75V |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Max Duty Cycle | 100 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 29.993795mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Max Output Current | 1.75A |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Topology | Buck |
| Min Input Voltage | 4.5V |
LM5085MME/NOPB Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.5V~75V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at Up to 1MHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, On Time Control. The switch converters are connected to a SWITCHING REGULATOR analog IC. Thare switching converters has a terminal (s) at DUAL . 8 terminations with a variety of function. DC switcher's voltage input of 48V. A search for "LM5085" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 75V. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controllers work at 1MHz Hz. DC switching uses 1.3mA when it is dormant. Since the dc switcher's maximum input voltage is 75V, the voltage must be regulated accordingly. Switching controller is necessary to have a supply voltage of 4.5V. An output current greater than 1.75A cannot be provided by the dc switcher. Its lowest voltage output is not less than 1.25V.
LM5085MME/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
Frequency: 1MHz
LM5085MME/NOPB Applications
There are a lot of Texas Instruments LM5085MME/NOPB DC to DC converter applications.
- Digital display device
- Household control circuits
- Pipe bending machines
- Remotely powered electric motors
- Correction machines
- Gear/thread machining machines
- Hydraulic presses
- Arc suppression circuits
- Various precision measuring detectors
- Domestic water pumps
