LM5085MYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5085MYX/NOPB Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~75V are the dc control's supply voltage and operating voltage, respectively. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at Up to 1MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, On Time Control is included in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. A DC switcher's nominal voltage of 48V is input. A search for "LM5085" will reveal other relevant dc to dc converter ics. There are only 8 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. Test statistics indicate DC regulator outputs 75V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 1MHz for this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 75V. DC switching uses 1.3mA when it is dormant.
LM5085MYX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
LM5085MYX/NOPB Applications
There are a lot of Texas Instruments LM5085MYX/NOPB DC to DC converter applications.
- Computed tomography (CT)
- Radio equipment
- Computer-related products
- Emergency lighting monitoring equipment
- Flaw detection equipment
- Ball screw pair
- Direct power supply system
- CMM
- ATMs
- Bending machines
