LM5085QMY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5085QMY/NOPB Overview
The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 4.5V~75V voltage are supplied and operated. Suitable for a -40°C~125°C TJ dc switcher. Switching can be done at Up to 1MHz with this switching controller. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, On Time Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 8 of dc switching. The DC switcher's nominal voltage is 48V. In addition to "LM5085", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 4.5V. DC regulator outputs 75V voltage based on test statistics. In most cases, the dc dc regulator's output current is 1.75A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 1MHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 75V to the voltage regulator dc to dc. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. DC switching uses 1.3mA when it is dormant.
LM5085QMY/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
LM5085QMY/NOPB Applications
There are a lot of Texas Instruments LM5085QMY/NOPB DC to DC converter applications.
- Industrial controllers
- Lathes
- Window air conditioners
- Magnetohydrodynamic power
- Constant current circuits
- Computer rooms
- Digital precision reference circuits
- Terrestrial set-top boxes
- Correction machines
- Automatic plug-in machines
