LM5085SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 100% |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5085SD/NOPB Overview
Capsuled in the 8-WFDFN Exposed Pad package, the switching controller suits most application needs. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~75V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. A switching controller such as this can switch at a value of Up to 1MHz . A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, On Time Control provides dcdc regulator efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 8 terminations. DC switcher's voltage input is 48V. Other relevant dc to dc converter ics will be returned if you search "LM5085". There are 8 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. A 75V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 1.75A, so note that when you start the project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. There is a maximum frequency of 1MHz for this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 75V. DC switchings that are dormant use 1.3mA.
LM5085SD/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
LM5085SD/NOPB Applications
There are a lot of Texas Instruments LM5085SD/NOPB DC to DC converter applications.
- Series voltage regulation circuits
- Grinders
- Communication system
- Handheld GPS
- Digital display device
- Access control systems
- Laboratories
- Automation technology
- Gear/thread machining machines
- Scientific research
