LM5085SDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM5085 |
| Function | Step-Down |
| Output Voltage | 75V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 1.3mA |
| Control Features | Current Limit, Enable, On Time Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Number of Output Phases | 1 |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5085SDX/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 8-WFDFN Exposed Pad package. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). Voltages 4.5V~75V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. There is a switch at Up to 1MHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, On Time Control for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 8 of dc switching. DC switcher's input voltageis 48V volts. A search for "LM5085" will reveal other relevant dc to dc converter ics. 8 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. A 75V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1.75A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. This dc regulatorhas a max frequency of 1MHz. Users should apply 75V to operate the voltage regulator dc to dc safely and reliably. When the dc switching is dormant, it uses 1.3mA. This controller switches with 1 phases.
LM5085SDX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control
Max Duty Cycle: 100 %
LM5085SDX/NOPB Applications
There are a lot of Texas Instruments LM5085SDX/NOPB DC to DC converter applications.
- Computer application technology
- Automatic plug-in machines
- Digital video recorders
- Surface processing equipment
- Domestic water pumps
- Printing equipment
- Driver circuits
- Sensitive electronic devices
- Product burn-in
- Motor controller circuits
