LM5088MH-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.205V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Max Input Voltage | 75V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.205V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 94 % |
| Clock Sync | Yes |
| Duty Cycle | 97 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5088MH-1/NOPB Overview
As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 4.5V~75V. A -40°C~125°C TJ dc switcher is not a problem. A switching controller such as this can switch at a value of 50kHz~1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Ramp, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 48V. In addition to "LM5088", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 16 pins. Test statistics indicate DC regulator outputs 1.205V voltage. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 94 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. Switching controllers work at 1MHz Hz. A dc switching in a dormant state uses 3.8mA. The maximum input voltage of this dc switcher is 75V, so users must limit the voltage accordingly. The supply voltage must be 4.5V. voltage controllers with a minimum voltage output of 1.205V cannot operate.
LM5088MH-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
Frequency: 1MHz
LM5088MH-1/NOPB Applications
There are a lot of Texas Instruments LM5088MH-1/NOPB DC to DC converter applications.
- Computer application technology
- Milling machines
- Hydrogen power
- Power supplies of electronic gadgets
- Imported equipment
- Geothermal power
- Computed tomography (CT)
- Gear/thread machining machines
- Telecommunications equipment
- USB circuits
