LM5088MHX-2/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 94 % |
| Clock Sync | Yes |
| Duty Cycle | 97 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
LM5088MHX-2/NOPB Overview
As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. This switching controller can switch at 50kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 48V. Searching "LM5088" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 70V voltage. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 94 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. This dc regulatorhas a max frequency of 1MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 75V. In a dormant state, the dc switching uses 3.8mA.
LM5088MHX-2/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
LM5088MHX-2/NOPB Applications
There are a lot of Texas Instruments LM5088MHX-2/NOPB DC to DC converter applications.
- Power supplies of electronic gadgets
- Remotely powered electric motors
- Sink circuits
- Textile machinery
- Planers
- Hydrogen power
- Precision electronic equipment
- Household control circuits
- Hydro power
- Low output voltage switching power supply circuits
