LM5088QMH-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.205V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 7A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 50 % |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5088QMH-1/NOPB Overview
In the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. The pmic is packaged in Tube solid enclosure. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~75V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. The switching controller is capable of switching at the 50kHz~1MHz position. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 16 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 48V. Other relevant dc to dc converter ics will be returned if you search "LM5088". In total, switching converter has 16 pins. This dc dc voltage regulator should be powered by a voltage of 4.5V. Based on the test statistics, DC regulator outputs voltage 1.205V. You should note that the dc dc regulator's usual output current is 7A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulators have a maximum frequency of 1MHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 75V. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. The dc switching utilizes 3.8mA when it is in a dormant state.
LM5088QMH-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
LM5088QMH-1/NOPB Applications
There are a lot of Texas Instruments LM5088QMH-1/NOPB DC to DC converter applications.
- Computed tomography (CT)
- Bending machines
- Window air conditioners
- Driver circuits
- Die casting equipment
- Hydraulic presses
- Balance equipment
- Machining centers
- Electric heating, lighting
- Drilling machines
