LM5088QMH-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5088QMH-2/NOPB Overview
This switching controller fits most application requirements since it is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) package. For 1 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). dc controls with 4.5V~75V voltage are supplied and operated. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 50kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 16 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 48V is input. Other relevant dc to dc converter ics can be found by searching "LM5088". Pins number 16 of switching converter in total. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 70V. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 1MHz. Users should apply 75V to operate the voltage regulator dc to dc safely and reliably. Thare are switch converters of the Automotive, AEC-Q100 series. As long as the dc switching is in a dormant state, it utilizes 3.8mA.
LM5088QMH-2/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5088QMH-2/NOPB Applications
There are a lot of Texas Instruments LM5088QMH-2/NOPB DC to DC converter applications.
- Digital video recorders
- Direct power supply system
- Various precision measuring detectors
- Electric water heaters
- Television equipment
- Overvoltage protection circuits in TV sets
- Experimental setup
- Terrestrial set-top boxes
- Low output voltage switching power supply circuits
- Lathes
