LM5088QMHX-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5088QMHX-1/NOPB Overview
It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~75V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 50kHz~1MHz. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 48V. LM5088 can be searched for other relevant dc to dc converter ics. Switching converter has a total of 16 pins. dc dc voltage regulators should have a minimum input voltage of 4.5V. DC regulator outputs 70V voltage according to the test statistics. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. The max frequency of the pmic can reach 1MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 75V. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. Dormant dc switchings use 3.8mA.
LM5088QMHX-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5088QMHX-1/NOPB Applications
There are a lot of Texas Instruments LM5088QMHX-1/NOPB DC to DC converter applications.
- Low output voltage switching power supply circuits
- PSRR circuits
- Solar power plants
- Mobile phones
- Serial communication converter
- Adjustable voltage or current linear circuits
- Drilling machines
- Linear guide
- Milling machines
- Injection molding machinery
