LM5088QMHX-2/NOPB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM5088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 70V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 75V |
| Input Voltage-Nom | 48V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~75V |
| Quiescent Current | 3.8mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
LM5088QMHX-2/NOPB Overview
Capsuled in the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. It can switch at 50kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Enable, Frequency Control, Ramp, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 16. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 48V. In addition to "LM5088", there are other relevant dc to dc converter ics you can find. 16 pins are present on switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Based on the test statistics, DC regulator outputs voltage 70V. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 75V. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. In a dormant state, the dc switching uses 3.8mA.
LM5088QMHX-2/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM5088QMHX-2/NOPB Applications
There are a lot of Texas Instruments LM5088QMHX-2/NOPB DC to DC converter applications.
- Household control circuits
- Various precision measuring instruments
- Elevator lighting
- Various precision measuring detectors
- Packaging
- Printing
- Terrestrial set-top boxes
- Various CNC machine tools
- Domestic water pumps
- Pipe bending machines
