LM5100ASD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 3A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 430ns |
| Fall Time (Typ) | 260 ns |
| Turn-Off Delay Time | 1 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Turn On Time | 45 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 45 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM5100ASD/NOPB Overview
A higher level of flexibility is provided by its 10-WDFN Exposed Pad package.Tape & Reel (TR) represents the package.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~14V supply voltage.This device is designed with a N-Channel MOSFET gate type.For this device, the temperature range is -40°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.It's configured with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM5100.Surface Mount is the way it takes to mount the device.As a result, it is configured with 10 pins when it is designed.In order to operate, a voltage of 12V has to be applied.The maximum output current can amount to 3A.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.Ideally, the high-side voltage should not exceed 118V.The basis of this system consists of 2 outputs.Mosfet driver supports an output current of 3A.Its quiescent current at 200μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5100ASD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100ASD/NOPB Applications
There are a lot of Texas Instruments LM5100ASD/NOPB gate drivers applications.
- Head-up and Head mounted displays
- Motor Controls
- High-speed communications
- Motor controllers
- UPS systems
- Topologies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- Commercial air-conditioning (CAC)
- Solar power supplies
