LM5100ASDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-N8 |
| Max Output Current | 3A |
| Nominal Supply Current | 2mA |
| Output Current | 3A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 430ns |
| Fall Time (Typ) | 260 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 45 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 45 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5100ASDX/NOPB Overview
The 10-WDFN Exposed Pad package provides greater flexibility.Tape & Reel (TR) represents the packaging method.2 drivers are incorporated for its configuration.Surface Mount is the way in which it is mounted.When the supply voltage is 9V~14V it is able to demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5100.The mount method is Surface Mount.When designing, the device is configured with 10 pins.In addition, it is specifically designed to operate with a supply voltage of 12V.3A is the maximum output current.There are several useful electronic components within its subcategory MOSFET Drivers.The board has a total of 8 component pins.High-side voltage - Max (Bootstrap) can be as low as 118V.The output current supported by the device is 3A.When not affected by external factors, this part consumes its quiescent current at 200μA.
LM5100ASDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100ASDX/NOPB Applications
There are a lot of Texas Instruments LM5100ASDX/NOPB gate drivers applications.
- Smart Phones
- Isolated Supplies for Motor Control
- Topologies
- Industrial Modules
- Digitally controlled power supplies
- DC-DC Converters
- Dual-Battery Systems
- A/D drivers
- Motor Controls
- serial peripheral interface (SPI), I2C
