LM5100BMA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| Output Voltage | 118V |
| Max Output Current | 2A |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5100BMA Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A package of Tube has been used.Configuration is based on 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 9V~14V supply voltage, its superiority can be demonstrated.Gate type N-Channel MOSFET has been used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM5100.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver is possible for the output current to be as low as 2A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.An output current of 2A is supported.In this case, it produces a voltage of 118V.Its quiescent current at 200μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5100BMA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
Quiescent current of 200μA
LM5100BMA Applications
There are a lot of Texas Instruments LM5100BMA gate drivers applications.
- Motor Controls
- Telecom switch mode power supplies
- Uninterruptible Power Supplies (UPS)
- Solar power supplies
- Multicolor LED/laser displays
- UPS systems
- Automotive Applications
- Line drivers
- AC-DC Inverters
- Portable computers
