LM5100BMAX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM5100 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5100BMAX Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.A total of 2 drivers are integrated into its configuration.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a 9V~14V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~125°C TJ.The input type is Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number LM5100.The mount method is Surface Mount.When designing, the device is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.There is a maximum output current of 2A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.The high-side voltage - Max (Bootstrap) can be up to 118V.This device is capable of delivering 2A current.A part's quiescent current at 200μA is the amount of current consumed when it is not affected by external factors.
LM5100BMAX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100BMAX Applications
There are a lot of Texas Instruments LM5100BMAX gate drivers applications.
- Industrial Power Supplies
- Telecom switch mode power supplies
- PCMCIA applications
- Portable Media Players
- Isolated switch mode power supplies (SMPS)
- Active filtering
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Industrial Motor Inverter - Power Tools, Robotics
- Industrial Modules
- DC-DC Converters
