LM5100BSD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 10 |
| Output Voltage | 18.3V |
| Max Output Current | 2A |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5100BSD Overview
For greater flexibility, the 10-WDFN Exposed Pad package is adopted.A packaging method of Tape & Reel (TR) is used.Configuration is based on 2 drivers.Gate drivers is mounted in the way of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~14V.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device allows temperatures in the range of -40°C~125°C TJ.Input type of Non-Inverting is used.Its configuration starts with 10 terminations.There are various related parts under its base part number LM5100.The device is mounted using Surface Mount.A total of 10 pins are available on the device.The device is specifically designed to operate at 12V volts.In the maximum case, the output current can be 2A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 10 component pins is available.High-side voltage - Max (Bootstrap) can be as low as 118V.Mosfet gate drivers can deliver a current of 2A.When this voltage is produced, it is marked as 18.3V.Its quiescent current at 200μA refers to the current this part consumes on the condition of not being affected by external factors.
LM5100BSD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100BSD Applications
There are a lot of Texas Instruments LM5100BSD gate drivers applications.
- Isolated switch mode power supplies (SMPS)
- Topologies
- Welding
- Portable Navigation Devices
- Motor controllers
- Motor Controls
- Multicolor LED/laser displays
- High frequency line drivers
- Active filtering
- High power buffers
