LM5100BSDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 10 |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM5100BSDX Overview
A higher level of flexibility is provided by its 10-WDFN Exposed Pad package.Tape & Reel (TR) represents the packaging method.Configuration is based on 2 drivers.Surface Mount is the way in which it is mounted.When the supply voltage is set to 9V~14V, it can demonstrate its superiority.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is used as the input type in this program.Mosfet driver is based on 10 terminations.Many related parts can be found under its base part number LM5100.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 10 pins when designing.Mosfet driver is designed specifically to run on 12V volts of power.There are various useful electronic components in its subcategory MOSFET Drivers.Components with 10 pins are available.High-side voltage - Max (Bootstrap) can be as low as 118V.This device supports a current output of 2A at the output.Its quiescent current at 200μA refers to the amount of current it consumes when unaffected by external factors.
LM5100BSDX Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100BSDX Applications
There are a lot of Texas Instruments LM5100BSDX gate drivers applications.
- Motor Control
- Motor Controls
- UPS systems
- Isolated Supplies for Motor Control
- Welding
- High-speed communications
- Industrial Modules
- serial peripheral interface (SPI), I2C
- White Goods - Air Conditioner, Washing Machine,
- AC-DC Inverters
