LM5100BSDX/NOPB
| Parameters | |
|---|---|
| Number of Drivers | 2 |
| Turn On Time | 0.045 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 µs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Max Output Current | 2A |
| Nominal Supply Current | 2mA |
| Output Current | 2A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 570ns |
| Fall Time (Typ) | 430 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 570ns 430ns |
| Channel Type | Independent |
LM5100BSDX/NOPB Overview
Its 10-WDFN Exposed Pad package provides greater flexibility.There is a package in the form of Tape & Reel (TR).2 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.Using a 9V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.This gate type has a N-Channel MOSFET design.Temperature range -40°C~125°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Its configuration starts with 10 terminations.There are various related parts under its base part number LM5100.Mosfet driver is mounted using the Surface Mount method.Mosfet driver is configured wMosfet driverh 10 pins when designing.Specification is for 12V supply voltage operation.An output current as high as 2A can be achieved at maximum power.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.There can be a voltage up to 118V on the high-side (Bootstrap).Mosfet gate drivers supports a current output of 2A.Its quiescent current at 200μA refers to the amount of current it consumes when unaffected by external factors.
LM5100BSDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100BSDX/NOPB Applications
There are a lot of Texas Instruments LM5100BSDX/NOPB gate drivers applications.
- High frequency line drivers
- Portable computers
- Automotive Applications
- Video amplifiers
- A/D drivers
- Motor controllers
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- General Purpose 3-Phase Inverter
- High-voltage isolated DC-DC converters
