LM5100CSD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Pin Count | 10 |
| Nominal Supply Current | 2mA |
| Output Current | 1A |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 990ns |
| Fall Time (Typ) | 715 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
LM5100CSD Overview
The 10-WDFN Exposed Pad package provides greater flexibility.The packaging method is indicated by Tape & Reel (TR).Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.By using 9V~14V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Input type of Non-Inverting is used.Mosfet driver consists of 10 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number LM5100.The mount method is Surface Mount.When designing, the device is configured with 10 pins.Specification is for 12V supply voltage operation.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.On the board, there are 10 component pins.A boot strap voltage of 118V is the maximum possible high-side voltage.Mosfet driver supports an output current of 1A.When no external influences are present, its quiescent current at 200μA refers to the current this part consumes.
LM5100CSD Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100CSD Applications
There are a lot of Texas Instruments LM5100CSD gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Active filtering
- High frequency line drivers
- Telecom switch mode power supplies
- DC-DC Converters
- Portable Media Players
- Isolated switch mode power supplies (SMPS)
- Topologies
- Uninterruptible Power Supplies (UPS)
- Active Clamp Flyback or Forward and Synchronous Rectifier
