LM5100CSD/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM5100 |
| Max Output Current | 1A |
| Nominal Supply Current | 2mA |
| Output Current | 1A |
| Propagation Delay | 20 ns |
| Quiescent Current | 200μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ns |
| Rise Time | 990ns |
| Fall Time (Typ) | 715 ns |
| Turn-Off Delay Time | 1 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.045 μs |
| High Side Voltage - Max (Bootstrap) | 118V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM5100CSD/NOPB Overview
In order to increase flexibility, the package 10-WDFN Exposed Pad is used.Gate drivers is package in Tape & Reel (TR) case.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~14V.Gate type N-Channel MOSFET has been used in its design.-40°C~125°C TJ is the allowed temperature range for this device.Input type of Non-Inverting is used.Its configuration is based on a total of 10 terminations.You will find various related parts under the base part number LM5100.Mosfet driver is mounted using the Surface Mount method.When designing, the device is configured with 10 pins.The device is specifically designed to function with a supply voltage of 12V V.An output current as high as 1A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.High-side voltage - Max (Bootstrap) can be as low as 118V.The output current can be set to 1A.When not affected by external factors, its quiescent current at 200μA refers to how much current this part consumes.
LM5100CSD/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 118V
Quiescent current of 200μA
LM5100CSD/NOPB Applications
There are a lot of Texas Instruments LM5100CSD/NOPB gate drivers applications.
- AC-DC Inverters
- DC/DC converters
- Commercial air-conditioning (CAC)
- Topologies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- High frequency line drivers
- Video amplifiers
- Portable Navigation Devices
- High current laser/LED systems
- serial peripheral interface (SPI), I2C
